療器材類/測血壓外殼.jpg)
In the processing of medical device shell, the first thing to do is to carry out blanking processing. When the good blanking is …… MORE
Most of the burrs on the plastic shell of the power supply occur on the parting surface, that is, where the molten material flow…… MORE
The cracking of plastic injection products includes filiform cracks, microcracks, white tops and cracks on the surface of plasti…… MORE
Shell shortage, also known as lack of glue, insufficient filling, insufficient injection, incomplete plastic shell, etc., is the…… MORE
With the development of the times, plastic shell has been more and more deeply into our life. Many friends can't avoid using pla…… MORE
With the continuous implementation of various epidemic prevention and control measures, although the total number of confirmed c…… MORE
During the injection molding process, the dents of the plastic shell are shrinkage dents generated after the plastic is cooled a…… MORE
The finished product quality and processing cost of injection mold are closely related to the quality of injection mold. Therefo…… MORE
療器材類/霧化器殼3.jpg)
The shell of medical devices is usually manufactured by low-pressure pouring, which is produced by simple molds, such as aluminu…… MORE
Omnidirectional injection molding is to inject the plastic melt into the middle of the closed mold cavity under high pressure, a…… MORE
What is the manufacturing process of insert molding? Insert molding is the process of forming thermoplastic materials around pre…… MORE
Overview plastic extrusion molding is to heat the plastic to the flowing state, then make it pass through the plastic mold under…… MORE
備/監(jiān)控器3.jpg)
療器材類/假牙清潔器殼.jpg)
殼2.jpg)
類/掃地機(jī)殼2.jpg)
殼10.jpg)
